Fine-Tuning Picture Mode
HOMEHOME Setting iconSetting icon All Settings iconAll Settings icon Picture Picture Mode Settings
This feature allows you to adjust the selected picture mode in detail.
Backlight
Controls the level of screen brightness by adjusting the backlight. The closer to 100 the brighter.
Decrease the Backlight to reduce energy consumption.
Depending on the Energy Saving(Auto/Maximum), you may not be able to adjust the Backlight.
In this case, navigate to HOMEHOME Setting iconSetting icon All Settings iconAll Settings icon Picture Energy Saving and set to Off or Minimum.
OLED LIGHT
Adjusts the display brightness by varying the brightness of the OLED panel.
Contrast
Adjusts the contrast of the bright and dark areas of the picture. The closer to 100, the higher the contrast will be.
Brightness
Adjusts the overall screen brightness. The closer to 100, the brighter the screen will become.
Sharpness
Adjusts the sharpness of the image. The closer to 50, the sharper and clearer the image will be.
V Sharpness
Adjusts the sharpness of the contrast edge in the vertical direction.
H Sharpness
Adjusts the sharpness of the contrast edge in the horizontal direction.
Color
Tones down or up the colors displayed on the screen. The closer to 100 the deeper the color.
Tint
Adjusts the color balance between red and green displayed on the screen. The closer to Red 50, the redder the color will be. The closer to Green 50, the greener the color will be.
Color Temperature
Adjusts the color temperature from cold to warm.
The settings you specify only applies to the currently selected input mode.
To apply your current picture settings to all input modes, select Apply to All Inputs.
Depending upon the input signal or the selected picture mode, the available options may differ.
The configurable items differ depending upon model.
Resetting Picture Mode
HOMEHOME Setting iconSetting icon All Settings iconAll Settings icon Picture Picture Mode Settings Reset
This option will reset the Picture settings.
You can reset the Picture modes separately by selecting the Picture mode you wish to reset and enabling it.